Matrix Setu ATA211G Especificações Página 80
- Página / 184
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
74 Matrix SETU ATA211G System Manual
Peer-to-Peer Numbers
Calls made between two IP clients without the intervention of a Proxy Server are defined as Peer-to-Peer Calls
(P2P calls). P2P call can be made from FXS or Mobile port.
As the Peer-to-Peer call application does not require a SIP server, voice communication using this application is
done virtually free of cost. The major cost savings offered by this application makes it a very attractive mode of
inter-branch or intra-office voice communication.
Peer-to-Peer call applications can also be used by residential users for making overseas calls at no cost.
A maximum of 500 locations can be interfaced using ATA211G.
To use this feature:
• There must be a SETU ATA211G installed at each location.
• The SETU ATA211G at each location must have a Static IP Address.
Let us take the installation scenario illustrated below as an example.
• At both locations ATA is directly connected to the IP network.
• At each location, you must do the following configuration:
• enable a SIP trunk to be used for Peer-to-Peer calling.
• set the SIP Trunk Mode to Peer-to-Peer.
• configure the number callers must dial to reach this SIP trunk as its SIP ID.
• set the Incoming Call Routing option on the SIP trunk as Route to FXS.
• configure Outgoing Call Route on the FXS port.
• configure Incoming Call Routing on the Mobile port.
• configure the Peer-to-Peer table.
The Peer-to-Peer table stores upto 500 entries. Each entry consists of the parameters Number, Name,
Minimum Digits, Maximum Digits and Destination Address.
• In this example, you would have to configure the Peer-to-Peer table as follows:
• At Location A, in the Number field of the Peer-to-Peer table, enter the Number you want to dial to
call the phone at Location B. In this case, 3001.
IP Network
Broadband
Modem/Router
Broadband
Modem/Router
WAN
ATA211G
FXS
ATA211G
FXSWAN
190.1.1.200
190.1.1.100
Location-A
Location-B
LAN
2001
3001
LAN
Mobile
Mobile
GSM Network
GSM Network
- SETU ATA211G 1
- System Manual 3
- Documentation Disclaimer 4
- Contents 5
- Introduction 7
- Instructions 8
- Cross-references 8
- Terminology 8
- Know Your SETU ATA211G 11
- Ports and Connectors 12
- Applications of SETU ATA211G 14
- IP Network 15
- Getting Started 17
- Mounting the SETU ATA211G 18
- Connecting SETU ATA211G 19
- Press the yellow button 20
- Insert SIM with contact side 20
- Configuring SETU ATA211G 22
- Configuring using a Phone 25
- Configuring Basic Settings 27
- 1. Click Region 29
- SIP Trunks 31
- Trunk Settings 32
- Incoming Call 35
- Vocoders 39
- Advanced 40
- Mobile Port 44
- FXS Port 54
- Outgoing Call 55
- Class of Service 58
- Passwords 62
- Changing User Password 63
- DNS Server 67
- Advanced Settings 69
- System Parameters 70
- Called Party Number Table 75
- 4. For each Index number 76
- Dialed Number Table 77
- Peer-to-Peer Numbers 80
- 001 No Match Found 01 24 81
- 002 3 04 04 190.1.1.100 81
- Making Peer-to-Peer Calls 83
- Mobile Emergency Numbers 84
- Digest Authentication 86
- PIN Authentication 89
- 3. Click PIN Authentication 90
- Daylight Saving Time 91
- as 60 minutes 93
- Static Routing 94
- 3. Click Static Routing 95
- Reinstate Factory Defaults 97
- Restart SETU ATA211G 99
- 3. Click Syslog 100
- 1. Log in as User 101
- 1. Log in as Admin 102
- 3. Click PCAP 102
- 9. You may log out of Jeeves 104
- Software Upgradation 105
- Auto Configuration 106
- Features of SETU ATA211G 109
- Making a Second Call 110
- Call Transfer 111
- Call Toggle 113
- Call Waiting 114
- Using Call Waiting 115
- Conference 117
- Do-Not-Disturb 118
- Using Phone 119
- Call Forward 120
- Caller ID Restriction 124
- Using Commands 125
- Selective SIP Trunk Access 126
- Speed Dialing 127
- Configuring Speed Dialing 128
- Multi Stage Dialing 135
- End of Dialing 140
- Mobile Network Selection 141
- About Network Operator Codes 142
- How it works? 143
- Configuring RCOC feature 144
- 5. Click Submit to save 145
- System Status 147
- Network Parameters 150
- Date &Time 152
- Firmware 152
- Appendix 155
- Ring Cadences 156
- Acronyms 161
- Features at a Glance 163
- System Commands 164
- Product Specifications 166
- Dimension (W x H x D) 168
- Power Supply 168
- Environmental 168
- Warranty Statement 169
- Regulatory Information 171
- Version 2, February 2011 184
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.083 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais