Matrix Setu ATA211G Especificações descarregar pdf (Página 36)

30 Matrix SETU ATA211G System Manual

• Route To FXS: The system will place all calls received on the SIP Trunk on the FXS port. The phone

connected to the port will start ringing for the duration of the Ring Timer (default: 45 seconds). If the call

is not answered within this timer, it will be rejected. This is also the default routing option.

• Route to fixed destination number through Mobile: The system will place all calls received on the

SIP Trunk to a Fixed Destination Number through the Mobile port.

If you select this option, define the destination number in the Fixed Destination Number field.

• Route to FXS. If not answered within ring timer, route to fixed destination number through

Mobile: The system will place all calls received on the SIP Trunk on the FXS port. The phone

connected to the port will start ringing for the duration of the Ring Timer (default: 45 seconds). If the

call is not answered within this timer, the call will be automatically routed to the Fixed Destination

Number through the Mobile port.

If you select this option, define the destination number in the Fixed Destination Number field.

• Answer the call, collect number & route to FXS: Select this option, if FXS port of SETU ATA211G is

connected to the FXO port of the PBX and you want callers to reach extensions of the PBX by simply

dialing the extension number. When there is an incoming call on the SIP trunk, the call is answered

and dial tone is played to the caller. When the caller dials the number, ATA will collect the digits and

route the call from its FXS port.

• Answer the call, collect number & route to Mobile: Select this option, if you want the system to first

answer the call on the SIP trunk, play dial tone to the caller, and when the caller dials the number, to

collect the digits and route the call to the Mobile port.

• Route as per called party number: Select this option, if you want all incoming calls on the SIP trunk to

be routed on the basis of the Called Party Number received in INVITE message.

If you select this option, you must configure the Called Party Number Table. See “Called Party

Number Table” for instructions.

• Enter the Fixed Destination Number in this field, if the incoming call routing option requires the call to be

finally placed at a fixed destination. You can configure the fixed destination number of maximum 16 digits.

Default: Blank

• Enter the time duration in the Ring Timer field, for which the system plays the ring on the FXS Port for an

incoming call. Range of the ring timer is of 01 to 99 seconds. Default: 45 sec.

2. SETU ATA211G supports display of Calling Line Identity (CLI) received in the SIP request message on the

FXS port. To display CLI Number on FXS Port, you may select:

• Calling Number

• Called Number

Default: Calling Number

3. Define the type of response the system should send on the receipt of an incoming call on the SIP trunk.

For the On Connecting Media, Send parameter, you may select:

• 183 Session Progress

• 200 OK

Default: 183 Session Progress

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 183 184

Sem comentários

Matrix Setu ATA211G Especificações Página 36