Matrix Setu ATA211G Especificações descarregar pdf (Página 140)

136 Matrix SETU ATA211G System Manual

End of Dialing

Unlike a normal phone which transmits each digit you press to the telephone exchange for dialing, when you are

making an VoIP call, you must enter all the digits/characters and indicate to SETU ATA211G the 'End of Dialing',

i.e. that you have finished dialing.

SETU ATA211G considers End of Dialing when:

1. The Termination Digit, # (non-programmable), is pressed after dialing the number/IP Address/SIP URI.

2. The Inter Digit Wait Timer elapses, after which the system automatically dials out the number. By default

the Inter Digit Timer in the system is set to 5 seconds. The system will wait for 5 seconds after the last digit

is pressed, consider the number as complete and dial it out automatically.

To change the duration of the Inter Digit Wait Timer, see “System Parameters”.

3. The number of digits dialed from the phone connected to the FXS port matches with the length of the

Maximum Digits configured in the “Dialed Number Table”. Default: 16 digits.

When you dial a number from the phone connected to SETU ATA, the system will match it with the above end-of-

dialing indications and accept the one that matches first.

If you do not want SETU ATA to wait for the Inter Digit Wait Timer to expire to dial out the number, you may dial the

termination digit ‘#' after dialing the number string.

The system will consider the Maximum Digits configured as End-of-Dialing only

• when Route all calls as per Dialed Number Table is selected as Outgoing Call routing option for the

FXS port.

• when Dialed Number Table is selected as Incoming Call Route for the Mobile port.

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 183 184

Sem comentários

Matrix Setu ATA211G Especificações Página 140