Matrix Setu ATA211G Especificações descarregar pdf (Página 76)

70 Matrix SETU ATA211G System Manual

To be considered as a valid number, the number received must be equal to or more than the Minimum digits

configured. If the number received matches the Minimum digits but exceeds the maximum digits, the system will

strip off the extra digits and route the number.

If the incoming CLI does not match with any entry in Called Party Number Table (i.e. the number does not exist in

the table, the call will be routed through the destination route for the first entry at Index 001, i.e. the No Match

Found entry, in the table.

To configure Called Party Number Table,

1. Log in as Admin with your password.

2. Click the Advanced Settings link on the left pane to expand.

3. Click Called Party Number Table.

The Called Party Number Table page opens.

4. For each Index number,

• Enter the desired Number you want to store in the table. The number must not exceed 24 characters.

The first Index number 01, is reserved for No Match Found. Start your entries from Index 02.

• For the number you entered, define the Minimum Digits, which the system should wait to receive

before considering it as a valid number. Default: 01.

• For the number you entered, define the Maximum Digits, which the system should wait to receive

before considering it as a valid number. Default: 24.

• For the number you entered, select required Destination Route, the system should use to route the

incoming call. Default: None for Index 01 and Mobile for Index02 to 10.

5. Click Submit save your entries.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 183 184

Sem comentários

Matrix Setu ATA211G Especificações Página 76