Matrix Setu ATA211G Especificações descarregar pdf (Página 33)

Matrix SETU ATA211G System Manual 27

• The Peer-to-Peer Numbers table opens in a new window.

• You can configure as many as 500 number strings, which are stored against an Index number.

• In the Number field, enter the peer-to-peer number string - prefix or entire number - that will be

dialed. The number string must not exceed 24 characters. Default: Blank.

If the number to be dialed out is <dialednumber@destination address>, for example,

[email protected], you must enter 1234 in this field.

• To identify the number string you configured, enter a name in the Name field. It may be the name of

your contact or any name you wish to assign to the number string. The name may consist of 24

characters (maximum). Default: Blank.

•As Minimum Digits, define the minimum length of the number string that must be dialed for the

system to consider it as a valid number. Default: 01.

If the peer-to-peer number string you dial is shorter than the Minimum Digits you have configured,

the system will not dial out the number.

•As Maximum Digits, define the maximum length of the number string that must be dialed out for

the system to consider it the complete number string. Default: 24.

If the peer-to-peer number string you dial is longer than the Maximum Digits you have configured,

the system will strip off the additional digits and dial out the number.

• In the Destination Address field, enter the domain name or IP Address to where the dialed peer-

to-peer number string is to be sent. The Destination Address may consists of up to 40 characters.

Default: Blank.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 183 184

Sem comentários

Matrix Setu ATA211G Especificações Página 33