Matrix Setu ATA211G Especificações descarregar pdf (Página 74)

68 Matrix SETU ATA211G System Manual

By default, SIP over TCP is enabled. If you want to receive SIP messages over TCP keep this option

enabled.

You must also enable TCP or TCP (Fallback to UDP) on the SIP Trunk.

• SIP UDP Port: This is the port on which the SETU ATA211G listens for SIP messages transported over

UDP. This port is also used as the source port for sending SIP messages to the remote peer. The valid

range for this port is 1024–65534. Default: 5060.

• SIP TCP Port: This is the port on which the SETU ATA211G listens for SIP messages transported over

TCP. This port is also used as the source port for sending SIP messages to the remote peer. The valid

range for this port is 1025–65534. Default: 5060.

• RTP Listening Port: This is the port on which the SETU ATA211G listens for RTP Packets. This port is

also used as the source port for sending RTP packets to the remote peer. The valid range for this port is

1024–65526. Default: 8000.

• SIP INVITE Timer: This is the time in seconds for which SETU ATA211G waits for a response from the

called party after sending INVITE message. This timer starts after sending INVITE message to the called

party and stops on receipt of the provisional response or the final response or when the user disconnects

the call. On expiry of the timer, the SETU ATA211G terminates the call process and gives an error tone to

the user. The range of the SIP INVITE TIMER is 010–180 seconds. Default: 30 seconds.

• SIP Provisional Timer: This is the time in seconds for which SETU ATA211G waits for final response after

receiving the provisional response from the called party. This timer starts on the receipt of the provisional

response from the called party and stops on receipt of the final response from the called party or when the

user disconnects the call. On expiry of the timer, the SETU ATA211G terminates the call process and gives

error tone to the user. The range of SIP Provisional Timer is 010–180 seconds. Default: 20 seconds.

• General Request Timer: This is the time in seconds for which the SETU ATA211G waits for response of a

transaction request. This timer starts on initiating a transaction and stops on the receipt of a response for

the request. On expiry of the timer, the SETU ATA211G clears the transaction. This timer is used for

Registration request, etc. The range of the General Request Timer is 10–60 seconds. Default: 20 seconds.

• Click Submit to save the settings.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 183 184

Sem comentários

Matrix Setu ATA211G Especificações Página 74